Do you need a Chamber of Connection walkthrough for Star Wars Jedi: Survivor? As part of our Star Wars Jedi: Survivor guide, we're covering all Jedi Chambers and providing a step-by-step guide to completing them. We shall cover puzzle solutions, combat strategies, and offer advice on how to tackle everything you'll encounter within each Jedi Chamber.
Star Wars Jedi: Survivor: Chamber of Connection Walkthrough
Below you'll find a complete Chamber of Connection walkthrough, covering where to find the Jedi Chamber and then how to complete it. Continue reading to discover how to finish this Jedi Chamber.
Where to Find the Chamber of Connection
You may find the location of the Chamber of Connection via a Rumor called Explore the High Republic Chamber in the Swamp, but if not, head to the Gorge Crash Site and take the elevator behind the Meditation Point all the way down. Ride the bird over to the pole you can swing across, then grapple onto the zipline. Halfway across, you're going to want to jump off and drop down onto the second zipline heading for the Chamber of Connection. Ride this to the end, then enter through the rocky entrance and grapple to safety. You can now head inside.
Chamber of Connection Walkthrough
To begin, stand on the block in the back of the room to reveal an Orb, which you can Pull towards you and then slot inside the Orb Coupler. Use BD-1's Koboh Grinder to create a path from the laser to the vines on the left-hand wall along the floor. Go through the door and up the stairs, but then turn back on yourself and wall run up to the higher ledge. You'll be back in the main room, where you can jump across to the higher platform.
From here, use BD-1's Koboh Grinder to shoot its material from the laser over to the vines in the back-left corner near where the Orb originally was. To create the path, you'll need to stand on the two blocks on the floor to close the shutters over the water in the back. Doing so opens up another path off to the side. Take the Orb with you, then Push it up to the ledge. From here, you can Push it over to a second Orb Coupler to create a bridge you can cross, with a Shortcut behind the door.
To remove the final set of vines, you'll need to create a really long path using BD-1's Koboh Grinder via the Shortcut you've just unlocked. When it comes to the bridge, give the purple flame enough of a path so it can burn for a while as you Pull the Orb over towards you and set it in the Orb Coupler. Eventually, you'll guide the flame to the vines and the way to the Essence will be clear.
Did you find our Chamber of Connection Walkthrough for Star Wars Jedi: Survivor useful? Click through to our Star Wars Jedi: Survivor guide for more information and share any further tips in the comments below.
Comments 0
Wow, no comments yet... why not be the first?
Leave A Comment
Hold on there, you need to login to post a comment...